prolink 650va ups specification
GENERAL
Capacity - 650VA
Dimension (mm) - 286x 96 x 138 (D x W x H)
Weight (kg) - 4.3
INPUT
Voltage Range - 162 ~290VAC (Single boost)140 ~ 300VAC (Double boost)
Frequency - 50Hz/60Hz (Auto-sensing)
Phase - Single + GND
OUTPUT
Voltage Range - 220-240VAC
Battery Mode - 220-240VAC
Frequency - 50Hz ±1% (Battery mode)
Waveform - Simulated sine wave (Battery mode)Sine wave (ACmode)
Transfer Time - 2ms typical
BATTERY
Type - 12V/8.2AH x 1
Backup Time - 8 – 20 mins depending on load
Recharge Time - 2-4 hours recover to 90% capacity
INTERFACE & INDICATORS
Interface - RS232, USB port, RJ45/RJ11 (Optional)
Display - LED/LCD Optional
Alarm - Batt. Mode, low battery, overload, fault, etc.
PROTECTION/MONITORING
Short Circuit Protection - Yes (Line mode & batterymode)
Surge Protection - Yes
Alarm - Audible & Visual
Overload Protection - Line mode : 100 – 120% 1 min change tofault mode , >120% change to fault mode immediatelyBattery mode : 100 – 120%1 min change to fault mode , >120% change to fault mode immediately
Intelligent Battery - Prevent overcharging of battery
Management - Protect battery and prolong battery life
Real Panel - AC ModeIndicator , Green LED Lighting , Battery Mode Indicator , Battery Normal :Yellow LED Lighting and Blinking every 30s , Battery Low: Yellow LED Lightingand Blinking every 2s , Overload and Fault Indicator , Overload: Red LEDBlinking every 2s
Fault: Red LED Lighting , Power Switch , Power AC Input , BackupOutlets
